ENGINEERS - MANUFACTURERS - SYSTEMS INNOVATORS Call Us: 901-382-2660  
Home Contact Us Ask ICC Privacy Policy

Site Navigation

About Us
Solutions
Industraline Catalog
  Conveyors
  Diverters
  Stoppers
  Rotation & Positioning Equipment
  Vertical Lifts
  Engineering Section
Corporate Info
Media Center
News

Strategic Partners

Jervis B. Webb Hytrol Conveyor Company Roach Conveyors
We accept Visa, Mastercard, Discover & American Express Click to verify BBB accreditation and to see a BBB report.

 

Industraline Catalog: Conveyors: MODEL CDW-40

Transport Conveyor

Industrial Conveyor Corp.

Call: 901-382-2660
Email: icc@industrialconveyor.com
Click for Printer Friendly Version

DESCRIPTION

The Industraline Model CDW-40 Transport Conveyor handles a wide variety of captive assembly skids, fixtures and pallets. A number of pre-engineered widths are available for 16" to 61" in 1" increments to meet any assembly or transport application. Model CDW-40 is ideally suited for Synchronous, Non-Synchronous Assembly and Transport Operation. The open center and modular construction allows for a variety of bolt-on accessories and add-on automation components to enhance your assembly line performance. Wheels are 2.7" DIA. Delrin II DE-8000 series material with 500 lbs. dead load capacity each. Wheel speed is 2.7" times faster than chain speed. Wheels are standard on 6" centers with a driving force of 85 lbs. per center. Other mounting centers are available upon request. Reference our Engineering and Accessories Sections to select the items that are best suited for your application.

 

 

SPECIFICATIONS

FRAME:  Medium duty aluminum frames at a weight of 6.5 lbs per foot per side. Structural grade alloy temper of 6063T6 and clear coat anodized architectural finish.  Longitudinal bolt slots on all sides for 1/4" and 3/8" diameter hex or square head bolts to mount accessories and support components.  Clip-on UHMW side guide for reduced friction and noise.  1" diameter passage, used as an optional air manifold to supply accessory components and operator tooling requirements.  Engineered plastic rollers for long wear life and reduced coefficient of friction between base chain and support rail.  Enclosed chain return path.  7 GA. bolted cross members.

BEARINGS:  All bearings are precision heavy duty, lubricated for life, ball bearing units with cast iron housings.

DRIVE SHAFT:  1 7/16" diameter located at the discharge end of unit

MOTOR DRIVE:  1/3 HP, 60cycle TEFC right angle gear motor available in all voltages (note: maximum load for 1/3 HP unit is 210 lbs., center mounted if possible.)

SPEED:  45 FPM, constant

INTERMEDIATE SECTIONS:  Available in lengths from 2'-0" min. to 12'-0" max. (please reference Engineering Section for Limitations or Space Requirements).

FLOOR SUPPORTS:  Adjustable type supports are available from 12" to 42" top of wheel (T.O.W.) with adjustment of + or - 1".

END TAKE-UP:  Manual screw type, separate for each side.

LOAD CAPACITY:  500 lbs. per foot dead load, 4680 lbs total load capacity.


FEATURES

  • Widths pre-engineered from 16" to 61".

  • Individual screw take-up on each side.

  • Bolt-up modular construction.

  • Driver chain #50 Riveted Roller chain.

  • UHMW clip-on side guide

  • Lengths: Reference Engineering Section for details

  • Wheels driven VIA. # 40 Single Strand chain.

  • Synchronous, Non-Synchronous Free Flow Accumulation

  • Smooth re-start

  • 45 FPM standard w/ optional fixed speeds from 5-120 FPM.

  • Wheel guards on both sides.


OPTIONAL EQUIPMENT

CHAIN:  Stainless Steel Chain

WHEEL CENTERS:  3",9",12", and 18" centers (load capacity changes with wheel centers.

DRIVES:  Center Drive w/ Center Take-Up & Fixed End Idlers.

ELECTRICAL CONTROLS:  Available as an option

MOTORS:  Available through 5 HP in all NEMA classes.

SPEEDS:  5-120 FPM, constant speed (specify) Note: HP capacity changes with speed (please reference engineering section).

SUPPORTS:  Multi-tier floor supporting or ceiling support header channel.

ACCESSORY COMPONENTS:  Reference Accessory and Component Sections for such items as Stoppers, Diverters, Positioners, Race Packs, Lock Devices, Pallet Exciters, Etc,...

WHEEL DRIVE:  #40 wheel to wheel for additional drive capacity.


PRE-ENGINEERED WIDTHS

EVEN WIDTH FIXTURES ODD WIDTH FIXTURES
Width BF Width BF Width BF Width BF Width BF Width BF
-- -- 30" 22-1/8" 46" 38-1/8" -- -- 31" 23-1/8" 47" 39-1/8"
16" 8-1/8" 32" 24-1/8" 48" 40-1/8" 17" 9-1/8" 33" 25-1/8" 49" 41-1/8"
18" 10-1/8" 34" 26-1/8" 50" 42-1/8" 19" 11-1/8" 35" 27-1/8" 51" 43-1/8"
20" 12-1/8" 36" 28-1/8" 52" 44-1/8" 21" 13-1/8" 37" 29-1/8" 53" 45-1/8"
22" 14-1/8" 38" 30-1/8" 54" 46-1/8" 23" 15-1/8" 39" 31-1/8" 55" 47-1/8"
24" 16-1/8" 40" 32-1/8" 56" 48-1/8" 25" 17-1/8" 41" 33-1/8" 57" 49-1/8"
26" 18-1/8" 42" 34-1/8" 58" 50-1/8" 27" 19-1/8" 43" 35-1/8" 59" 51-1/8"
28" 20-1/8" 44" 36-1/8" 60" 52-1/8" 29" 21-1/8" 45" 37-1/8" 61" 53-1/8"

Note:  Non-standard widths available upon request.


HOW TO SPECIFY

Qty. Model BF Length Speed T.O.W. H.P. Volts Phase
         

Elev.

   

 

  CDW-40              

Click for Printer Friendly Version